In this video I talk about the AMD RX 570 graphics cards and which brand I think is the best AMD RX 570. All cards will do a pretty good job at mining Ethereum at about 27 to 30 Mh/s however some cards are just better built easier to use and don’t get as hot.
The three different brands of RX 570 cards are Asus, Gigabyte and Sapphire.
Don’t forget to check out the best AMD rx 570 cards in action on my KraKen build.
Lets get straight into it, I have listed the pros and cons of the Sapphire cards below. Pros
* Price around $329 usd
* Has a bios switch which allows you to switch between a gaming bios and a mining bios, really handy if you want to build a gaming / mining rig.
* 2 x power ports 1 x 6 pin and 1 x 8 pin power ports. Handy for different power supplies.
* Save power by turning off the flashy lights. Can turn these lights off permanently without the need to install extra software.
* Cards come with a back plate good if you have cards sitting close together. Cons
* The cards are big so you will need allot of room to store them. 26 cms long.
* Sapphire cards heat up a bit more than their rivals.
* a little less stable and a little less able to be overclocked.
* Tend to use a little bit more power
* Price around $379 usd
* Smaller than the Sapphire cards at 24 cms.
* Run a little bit more stable at higher clocks.
* No back plate so they wont heat up as much.
* 1 x 8 pin power slot only. Comes with led though so you can see when the card is plugged in properly. Cons
* The cards don’t come with a back plate. Can be annoying when installing or when you have cards sitting close together.
* 1 x 8 pin power slot only.
* Can’t turn the light off permanently without installing software.
* Price around $279 usd
* Cheap price return on investment will be faster.
* Smaller than the Asus at 23 cms long.
* Has a back plate.
* Memory does over clock quite high.
* Gets hot! Can’t run to many of these cards together.
In the end the all the cards will do the job. However the best AMD rx 570 card would be the Asus. If you want to buy any of these cards and support 123myIT.com please use the licks below.
○○○○○○ Want to buy the parts at Amazon ○○○○○○
ASUS AMD RX 570 4GB https://amzn.to/2Lh9FiA
Gigabyte Aorus RX 570 4GB https://amzn.to/2GzpwVZ
Sapphire Nitro + RX 570 4GB https://amzn.to/2rUvI6u
In this video & article I explain how I was able to make more profit from mining Cryptocurrency by installing Solar panels on my roof. There is a few reasons why I decided to get solar. The first is to reduce my carbon foot print. We all have to do our bit to try and make the world a better place and there are some really easy ways to do this. That was the first reason.
The second reason was that I like to support the Solar industry. This is an industry that can solve allot of problems for humankind rather than burying it. Other industry’s out there are not so friendly towards out future.
The last reason was that I could use some of the power to mine Cryptocurrency. The panels will pay of the mining rig and the mining rig will pay off the Solar. This will happen at a much faster rate then if I was able to get some money back on my power bill from the energy company.
How does it work?
The sunshine hits the panels and then flows down into the house first, so you use the power before it goes out to the grid. And you can get a refund of power supplied by your energy retailer.
The current feed in tariff in Australia is not much something like 12cents per kilowatt hour on a good day you can put in about 4 kWH to the grid.
This is middle of winter figures so this would be higher in summer. You need to also take into account that you are using the power first before it goes out to the grid. Fridges will use that power before it goes out. The actual figure would be higher then 4 kWh. Because the feed in tariff is not much its important to use the power before it goes out to the grid. In this case I am using it to mine Ethereum.
You could go one step further and install a battery. That way any power would be stored in the battery and used at a later time. The problem with this at the moment is that the battery’s cost far outweighs moneys saved. Buying a battery would be money wasted pretty much.
This video will show you how I went about creating an Nvidia Mining Rig for my friend Phil. Phil likes to Gamble so I called this build The Gambler!
I have setup a full list of parts below if you wish to copy this build. And I have tried to add in some secondary parts list incase some parts are no longer available.
The Gambler build is very simular to my RX570 The Kraken build accept I swapped out the AMD RX 570 cards with Nvidia 1070s.
Through this video I also give some tips when building a new rig to do with troubleshooting setup and faulty risers.
a faulty Riser can cause all sorts of issues with mining rigs. The more hardware you add the more chance of failure.
The KraKen Triple miner is my latest build where I try to get the most out of the mining rig by using a more expensive CPU i7 7700 to mine Electroneum ETN or Monero XMR.
The KraKen Triple miner is my most ambitious mining rig yet which uses 8 GPUs as well as a high end CPU I& 7700 to mine Electroneum. At the time of the build GPUs were really expensive and hard to get. But since the video I have been able to get enough cash together to complete the whole rig. I will do an update to this rig in the coming days.
The big challenge which rigs this size is knowing exactly what size power supply size to buy.
In this video I used the AeroCool 850 and 750 watt power supply which wasn’t enough to power a full 8 set of graphics cards. But it got me started. In hindsight I probably should have gone for the 1600 watt EVGA power supply. However the prices of this power supply are massive so I tired to go cheaper. In the end the AeroCool 850 power supply failed on me so I took it back and got the 1200 watt Thermaltake Power supply.
Once the power supply’s were in it ran pretty well. Currently I have 7 x RX 570 cards and 1 x GTX 1070 card in the rig. And getting around 210 Mh/s of ETH mining and around 300 h/s of ETN mining. In the end I got rid of LBC Library mining as the coin had very low value and the power consumption goes up with the extra mining. I might move back to an Ethereum ETH, Decred DCR mining shortly once to market turns around.
This setup was and is very challenging. For newer miners I suggested starting with one card mining rig and then move to a 6 x GPU mining rig. Actually I think the best solution is 6 x mining rig and these will be the ones that I build in the future.
In this video I talk about Cryptocurrency Wallets and Exchanges. I use the website www.cryptocompare.com because I find it has allot of really good info on it if you are looking to find out more info on Cryptocurrency Wallets and Exchanges.
Once you find the Wallets menu on the site have a look through at the different types of wallets you can find.
The ones I talk about and use is Exodus.
The good thing about Exodus is that is supports a wide range of Cryptos. Bitcoin Ethereum Litecoin and other.
These wallets allow you to send and receive directly from your Computer. I use this wallet on my Windows computer. Also the wallet has a backup feature which is really cool.
Down side with the Exodus wallet is that it only works on one computer at once.
The tabs across the top of the Cyrptocompare website which allows you to filter the types of wallets. So for example if you wanted a wallet that was highly secure you would click the Secure tab.
Bitfinex exchange is the next thing I talk about. Once you have mined Cryptocurrency the next thing you can do with it is trade it on an Exchange. In this video I use Bitfinex as an example, see the picture below.
This is a good way to make extra coins but it also requires allot of patience. Which is something I struggle with! Also the other really good thing about exchanges is that you can trade your mined Crypto for different types of alt coins. Let say you have a good feeling about EOS then you would be able to Trade your mined earnings for the coin EOS.
So I show you how to setup your account and deposit your first coins into Bitfinex. I use it to mine my coins directly to the exchange saves me allot of hassle with gas fees from the myetherwallet wallet.
Well thanks for watching and reading guys I hope this one helps you out.
If you are new at Mining this video will give you some help choosing a coin and help you to get started in the world of Crypto coin.
I get allot of people on the 123myit YouTube channel asking me about what coins are good coins to mine. Really you should always do your own research and make up your own mind on what coin is right for you. But in this video I go through a few tips to help people gain some knowledge about the coins and hopefully make some great investment choices.
This video assumes you have built a mining rig and you are ready to start mining coins for a profit.
I personally use the website www.cryptocompare.com for allot of my information about the Crypto Coin. And this website is a really good place to start getting familiar with Crypto coins.
I started out mining Bitcoin via Nicehash miner but more recently I have switches from Nicehash to mining Ethereum via a pool called Nanopool. Check out the Nanopool and claymore miner setup video here.
I also talk about Electroneum (ETN) coin, which will be available to mine on Android phone.
This coin has been as cheap as 3 cents USD!!! This coin is a bargin in my mind if the developers can get it working it will be very interesting and I think well worth at least a small amount of investing at the very least install the app and setup the wallet and get it ready for when you can start mining Electroneum ETN with your android phone. You can also earn free coins or refer friends through the Earn FREE coins menu inside the Electroneum ETN wallet. If you want to refer me my code is C2C4DD shameless plug 🙂 Thanks for your support.
Hopefully trying to get as many videos up as I can I have loads to show you guys but its just getting the time and effort to make these things happen.
This video will show you how to build a mining rig on a budget.
This video will show you how to build a mining rig with a strict budget. I have tried to do a build where I keep the costs down to help people who might not have a massive budget but still want to get into mining. In this build I really only buy three parts. Power supply risers and graphics cards. The rest I was able to get for free.
Budget Mining Rig Build Parts
► Sapphire Nitro + 4GB http://amzn.to/2yXIwL5
► AeroCool 750 watt power supply http://amzn.to/2yNcG2u
► Motherboard free follow links above if you need one.
► Ram free follow links above if you need one.
► CPU Free follow links above if you need one.
► Frame free follow links above if you need one.
Want to buy me a beer?
For this guide and other 123myIT social pages see the links below.